Risultati di ricerca
Catalog #: 1734-IE2C. POINT I/O 2 Point Analog Input Module. Lifecycle status: ACTIVE. Find Product Drawings. Find Firmware & Downloads. Register this Product. Add to BoM. Get Support. 1734-IE2C. Find a Distributor. Technical Specifications. For full product specifications, please see the product catalog . Documentation.
- Summary of Changes
- Prevent Electrostatic Discharge
- Install the I/O Module
- 1734-TOP Base
- Remove a Mounting Base
- Wire the Module
- Communicate with Your Module
- Additional Resources
- Rockwell Automation Support
- Documentation Feedback
This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes. ATTENTION: Read this document and the documents listed in the Additional Resources section about installation, configuration and operation of this equipment before you install, configure, operat...
ATTENTION: This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment: Touch a grounded object to discharge potential static. Wear an approved grounding wriststrap. Do not touch connectors or pins on component boards. Do not touch circui...
The module can be installed before or after base installation. Make sure that the mounting base is correctly keyed before installing the module into the mounting base. In addition, make sure that the mounting base locking screw is positioned horizontal referenced to the base. WARNING: When you insert or remove the module while backplane power is on...
Make sure that the DIN rail locking screw is in the horizontal position. Turn the keyswitch to align the number with the notch. Notch position 3 is shown. Turn the keyswitch to align the number with the notch. Notch position 1 is shown. Make sure that the DIN rail locking screw is in the horizontal position. To install the module, proceed as follow...
To remove a mounting base, you must remove any installed module and the module installed in the base to the right. Remove the removable terminal block, if wired. WARNING: When you insert or remove the module while backplane power is on, an electric arc can occur. This could cause an explosion in hazardous location installations. Be sure that power ...
To wire the module, see the diagrams and tables. WARNING: If you connect or disconnect wiring while the field-side power is on, an electric arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding.
POINT I/O modules send (produce) and receive (consume) I/O data (messages). You map this data onto the processor memory. These modules produce 6 bytes of input data (scanner Rx) and fault status data. These modules do not consume I/O data (scanner Tx).
For more information on the products that are described in this publication, use these resources. You can view or download publications at rok.auto/literature.
Use these resources to access support information.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
- 1MB
- 24
Provides installation information for 1734-IE2C and 1734-IE2V input modules Analog Current and Voltage Output Module Installation Instructions, publication 1734-IN002 Provides installation information about 1734-OE2C and 1734-OE2V modules Communication Devices
- 9MB
- 221
Quickly access technical documents for Allen-Bradley Bulletin 1734 POINT I/O and communication modules and POINT Guard I/O modules.
This product was certified with the above certifications as of 2024-01-08. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries. POINT I/O 2 Point Analog Input Module.
Information about how to install the 1734-IE2C, Series C, POINT I/O Current Input Analog Module, 1734-IE2V, Series C, POINT I/O Voltage Input Analog Module, and POINT I/O 2 Current and 2 Voltage Input Analog Module.
2 feb 2019 · Point I/O 2 Channel Analog Current Input Module, 24 V DC. Up to 8 single-ended inputs or outputs per module. Thermocouple and RTD modules available. Individually configurable channels. On-board scaling. Selectable input filters. Over-range and under-range detection.
