Risultati di ricerca
Installation Instructions. 1734-IN040. Find more technical documentation for this product in the Technical Documentation Center . TYPE. Installation Instructions. PUBLICATION NUMBER. 1734-IN040.
- Important User Information
- Preventing Electrostatic Discharge
- Before You Begin
- Establish I/O Connections
- Configure Autobaud
- DHCP Enabled and Not Enabled
- Replace The Adapter
- Interpret Status Indicators
- Indicator Status for Modules
- Additional Resources
- Rockwell Automation Support
- New Product Satisfaction Return
Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid-State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes s...
ATTENTION: This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment: Touch a grounded object to discharge potential static. Wear an approved grounding wriststrap. Do not touch connectors or pins on component boards. Do not touch circui...
To effectively use your adapter, note the following considerations.
When you start a POINT I/O system and establish I/O connections, the outputs transition to the Idle state, applying Idle state data before going to Run mode. This occurs even when the controller making the connection is already in Run mode.
The adapter cannot reconfigure an I/O module that you previously configured to operate at a fixed baud rate. When you reuse a POINT I/O module from another POINT I/O system, configure the module to autobaud before using it with the adapter.
WARNING: When you change switch settings while power is on, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding.
Use these procedures to install a replacement adapter to an existing system. Disconnect the Ethernet connector(s) from the adapter. Pull up on the Removable Terminal Block (RTB) handle to remove the terminal block. WARNING: When you insert or remove the module while backplane power is on, an electrical arc can occur. This could cause an explosion...
Refer to the following diagram and table for information on how to interpret the status indicators.
Indicator Status for Modules Indicator Status for Modules
Refer to these related publications, as needed. If you would like a manual, you can: download a free electronic version from the internet: http://www.rockwellautomation.com/literature/ purchase a printed manual by contacting your local Allen-Bradley distributor or Rockwell Automation representative. Notes:
Rockwell Automation provides technical information on the Web to assist you in using its products. At http://www.rockwellautomation.com/support/, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best ...
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
- 842KB
- 24
The 1734-AENTR adapter is mounted on a DIN rail in slot 0, with a 1734-OW2/C relay output module in slot 1, a 1734-OV4E/C sink output module in slot 2, and a power supply (not shown). Rockwell Automation Publication 1734-UM014B-EN-P - June 2013. 27.
- 7MB
- 112
In this example, we mounted the 1734-AENTR adapter on a DIN rail in slot 0, with a 1734-OW2/C relay output module in slot 1, a 1734-OV4E/C sink output module in slot 3, and two other. Rockwell Automation Publication 1734-UM017F-EN-E - May 2023. 69.
- 7MB
- 136
Catalog #: 1000F-1734-AENTR Ford POINT I/O Dual Port Adaptor Module Lifecycle status: ACTIVE
Publication 1734-UM011A-EN-P - February 2004 Preface 2 How To Use This Manual This manual contains an overview of the 1734-AENT adapter. It describes how to install and configure the adapter, and provides examples showing how
MODEL OVERRIDES. THIRD ANGLE PROJECTION. 1734-AENTR. 2-PORT ETHERNET I/O ADAPTER MODULE. 1. 76.02. 2. 3. CREATED BY: SSHARM35.